Electric Tool Brushes, Industrial Brushes, Automotive, Motorcycle Brushes
English English Español Español
Home » Products » Automotive,Motorcycle Brushes
Automotive,Motorcycle Brushes

Automotive,Motorcycle Brushes

Specifications of Automotive, Motorcycle Brushes [ Graphite Products ]

Model Resistivity (μΩm) Shore Hardness Bulk Density (g/cm3) Flexural Strength (MPa) Contact Relief (V) Friction Coefficient Rated Current Density (g/cm2 ) Allow Circumferential Speed (m/s) Major Usage
AMB-01 0.76 28 2.65 21.9 L L 13 30 Heater motors, AC Generators, Door Lock Mortisers, Auxiliary Motors
AMB-02 0.83 28 2.63 29.2 VL L 13 30
AMB-03 3.43 30 2.68 26.7 L L 13 30
AMB-04 0.70 25 2.63 19.5 VL L 13 30
AMB-05 0.51 11 3.65 12.6 VL L 12 30 Winding Liner Magnetic Activated, Slip Ring Motors
AMB-06 0.52 20 3.85 34.5 VL L 19 25 Low Voltage, High Current Work Locations, Especially Applicable to 12V Automotive Starters and Light Motorcycle Starters
AMB-07 0.51 22 3.68 44.6 VL L 19 25 Low Voltage, High Current Work Place, Especially in 12V Automotive Starters and Motorcycle Starters
AMB-08 0.76 20 3.45 38.9 VL L 13 30 12V Starters, Window Lift Motors. Wiper Motor, Oil Pump Motors, Sump Pumps
AMB-09 0.09 7 6.75 79.8 L M 20 25 12V Starters, Slip Contact Films, Contact. DC Motors
AMB-10 0.43 21.5 3.88 44.7 L L 13 30
AMB-11 0.11 11.5 5.75 48.6 VL L 20 25
AMB-12 1.50 26 2.425 26.3 L L 13 30 Low Noise/Longevity Heater Motors
AMB-13 5.00 78* 2.70 / ≤1.6 ≤0.25 15 20 Generators, Heater Motors
AMB-14 0.65 76* 4.60 / ≤0.856 ≤0.25 15 15 120V Vackers
AMB-15 2.50 86* 3.35 / ≤1.3 ≤0.25 15 35 Automotive Starters and Synchronous Collecting Rings
1 Contact Relief :
Very High ≥3.6 V
High 2.4V-3.6V
Medium 1.4V-2.3V
Low 0.8V-1.3V
Very Low ≤0.8V 		2 Friction Factor :
High ≥0.20
Medium 0.15-0.20
Low 0.10-0.15
Very Low ≤0.10 		3 Rockwell Hardness - Carbon and Graphite Products

Other Products
    2. Carbon Graphite,Metal Impregnated GraphiteTechnical Parameters:MG-A1;Impregnated Materials:Furan Resin;Shore Hardness(HS):≥90; Porosity(%):< 1.5;Bulk Density(g/cm2):≥1.70; Compressive Strength(MPa):≥240;Bending Strength(MPa):≥65...
    2. Hot Pressing GraphiteTechnical Parameters:Numerical Value;Shore Hardness(HS):≥70; Porosity(%):< 0.2;Volume Density(g/cm2):≥1.75; Compressive Strength(MPa):≥150;Bending Strength(MPa):≥75;Friction Factor(F):≤0.15...
    2. Silicon Carbide-Mechanical SealsShore Hardness(HS):≥100;Porosity(%) :< 0.3;Bulk Density(g/cm2 ):≥3.00;Compressive Strength(Mpa):> 1150;Bending Strength(Mpa):> 335;Thermal Expansion Coefficient(/℃):4.5×10-4. Porosity(%):< 0.2...
    2. Electric Tool BrushesModel:EB-01,Resistivity (μΩm):40,Shore Hardness:55,Bulk Density(g/cm3):1.6,Contact Relief (V):M,Friction Coefficient:VL,Allow Circumferential Speed (m/s):40,Major Usage:Cutting Machine and Other Small Electric Power Tools...